RK-Ball-o-top – the brass ball valve with many advantages

This low priced ball valve is the ideal economical shut-off valve for cold and hot water, compressed air, gases and oils.

Advantages of  "RK-Ball-o-top":

• maintenance-free
• corrosion-resistant
• smooth running
• solid design

Certificates and Approvals:

• DVGW-approval

RK-Proball - an interesting alternative!

The RK-Proball series offers special interesting cost effectiveness. Depending on the design the ball valves are suitable in air pressure systems, light chemical industry, pulp and paper industry for alcalines, acids, solvents and other chemical agents. RK-Proball ball valve NC-types are certified acc. to German clean air act VDI 2440!
Flexible usability - a "Pro" for your plant.

Advantages of series "RK-Proball":

• special interesting cost effectiveness
• flexible usability
• certified acc. to German clean air act VDI 2440
• top flange DIN EN ISO 5211
• available with safety spring locking device
• best suited for automation
  

Accessories:

• safety spring locking device
  
• locking device for lever
  
• stem extension
  

Special designs:

• special materials like 1.4462, 1.4301
• HDPE tighten

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440
• Fire-Safe acc. to API 607 and BS 6755

INTEC K100 - the perfect solution for your laboratory and miniplant!

The high pressure series for all laboratory and miniplant applications for process industries. The series is available from threaded end to clampng ring connection. All variations are used for laboratory and also in control applications. A benefit for this series is also the smart possibility for automation. Certified acc. to German clean air act VDI 2440!

Advantages of series "INTEC K100":

• certified acc. to German clean air act VDI 2440
• compact design
• one piece body reduced fugitive emissions
• best suited for automation
• wide range of accessories

Accessories:

• heating jacket
• hand lever with bayonet locking
• hand lever extension
• block unit - padlock unit
• spring close unit - automatical return lever ("dead man handle")

Special designs:

• special materials like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.
• PEEK seated
• special connections on request

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440

INTEC K200-K - the wafer type ball valve of the modular INTEC system technology!

Equipped with all advantages of the INTEC K200 as well as face to face dimensions acc. to EN 558, GR. 107, this wafer type ball valve is the favorite for special materials in all chemical plants.

Advantages of series "INTEC K200-K"

• certified acc. to German clean air act VDI 2440
• equipped with all advantages of the series INTEC K200
• face to face dimensions acc. to EN 558, GR. 107
• in many special materials available
• top flange DIN EN ISO 5211

Accessories:

• heating jacket
• hand lever extension
• stem extension
• block unit - padlock unit
• grit unit
• hand lever with bayonet locking
• spring close unit - automatical return handle ("dead man handle")
• gear (hand operated)

Special designs:

• special materials like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Appovals:

• certified acc. to German clean air act VDI 2440
• Fire-Safe acc. to BS 6755 and EN ISO 10497

INTEC K200-K-E - economic wafer type ball valve

Maintenance-free and adjustable, with face to face dimensions acc. to EN 558, GR. 107, this economic wafer type ball valve is the synonym for economy in energy and standard applications.

Advantages of  "INTEC K200-K-E"

• face to face dimensions acc. to EN 558, GR. 107
• standardization face to face quarantee the interchangeability
• maintenance-free
• top flange DIN EN ISO 5211

Accessories:

• hand lever extension
• block unit - padlock unit
• grit unit
• hand lever with bayonet locking
• spring close unit - automatical return handle ("dead man handle")
• gear (hand operated)

Certificates and Approvals:

• inspection certificate acc. to EN 10204-3.1

INTEC K204-S-D - steam ball valve

The maintenance-free steam ball valve for the safe relaxation of steam-prominent elastomere hoses:

Advantages of  "INTEC K204-S-D":

• safe pressure relief of steam hoses
• saving of time acc. to self pressure relief
• increase the service life of steam hoses

Accessories:

• hand lever extension
• block unit - padlock unit

Certificates and Approvals:

• inspection certificate acc. to EN 10204-3.1

INTEC K400 - the multiple way ball valve of the modular INTEC system technology!

The universal multi port ball valve in the unit construction system of the INTEC K200-series. With 3-, 4- or 5-way applications, your medium is safety in flow.

Advantages of series "INTEC K400":

• certified acc. to German clean air act VDI 2440
• equipped with all advantages of the series INTEC K200
• full bore
• T- or L-bore
• overlap free ports available
• top flange DIN EN ISO 5211
• metal seated up to +400°C

Accessories:

• heating jacket
• hand lever extension
• stem extension
• block unit - padlock unit
• grid unit
• hand lever with bayonet locking
• gear (hand operated)

Special designs:

• special materials like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.
• other pressure classes and temperatures on request
• special face to face dimensions on request

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440, -10°C up to +220°C, 100.000 cycles

INTEC K500 - the tank bottom ball valve of the modular INTEC system technology!

The stem is angularly placed and thus a marsh free installation and trouble free automation is possible.

Advantages of series "INTEC K500":

• certified acc. to German clean air act VDI 2440
• equipped with all advantages of the series INTEC K200
• tank connections acc. to DIN 28140 part 1 (drain valve) or DIN 28117 (loose flange)
• clearance volume minimized
• marsh free installation
• trouble free automation
• metal seated up to +400°C

Accessories:

• heating jacket
• flushing connections

Special designs:

• special materials like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440, -10°C up to +220°C, 100.000 cyles

INTEC K600 - no compromise for your kettle pressure!

Stainless steel ball valves for pressure gauges and measurements lines. The different variations of your connection like flanges acc. to EN 1092, outside thread acc. to DIN 16288, pressure gauge connection acc. to DIN 16284 or female and male thread variations are available. The minimised dimensions and the safety regarding the pressure relief of the gauge are the absolutely advantages for this product. Available with vent bore, without vent bore, with test connection port or with expansion tube. Certified acc. to German Clean air act VDI 2440!

Advantages of series "INTEC K600":

• certified acc. to German clean air act VDI 2440
• different variations of connections
• minimised dimensions
• safety regarding the pressure relief of the gauge
• available wirth vent bore, without vent bore, with test connection port or with expansion tube

Accessories:

• hand lever extension
• stem extension
• block unit - padlock unit
• grid unit
• hand lever with bayonet locking
• spring close unit - automatical retrun handle ("dead man handle")

Special designs:

• special materials like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440

INTEC K700 - the sampling device ball valve of the modular INTEC system technology!

Advantages of  "INTEC K700":

• certified acc. to German clean air act VDI 2440
• equipped with all advantages of the series INTEC K200
• extremely big outlet
• sealing systems and body materials can be designed acc. to medium requirements
• cavity filler design is available
• bottle connection with thread acc. to DIN 168 or with spring loaded disk

Accessories:

• heating jacket
• hand lever extension
• stem extension
• block unit - padlock unit
• grid unit
• hand lever with bayonet locking
• bottle support with spring loaded disc
• metal bottle with bayonet locking
• protection cover with bayonet locking
• protection box made of stainless steel for vacuum or pressure relief
• hollow needle system for septum-bottle

Special designs:

• special materials like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440, -10°C up to +220°C, 100.000 cycles

INTEC K811 - the high-pressure ball valve of the modular INTEC system technolgy!

High precision bearings and both sides spring loaded seat ring elements are responsible for a safety handling in all applications of the high pressure ranges.

Advantages of  "INTEC K800":

• certified acc. to German clean air act VDI 2440
• equipped with all advantages of the series INTEC K200
• two-piece split body or three-piece split body
• extreme long-life acc. high precision bearing of the stem
• optimized arrangement of the bearing forces
• soft seated or metal seated
• leackage rate A

Accessories:

• heating jacket
• hand lever extension
• stem extension
• block unit - padlock unit
• grid unit
• hand lever with bayonet locking
• gear (hand operated)

Special designs:

• special materials like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440, -10°C up to +220°C, 100.000 cycles

TYPE 300 P - sampling device ball valves

The economical solution for open sampling in the field of laboratory- and process engineering. Optional variations of connections, e.g. female thread, clamping ring connection, cutting ring connection etc. are available.

Advantages of "TYPE 300 P":

• special designs for higher pressures and higher temperatures
• special material combinations
• available free of oil and grease
• available with spring close unit to avoid wrong opertion (open/close) by user

Accessories:

• stem extension
• grid unit
• spring close unit

Special designs:

• special materials

Certificates and Approvals:

• inspection certificate acc. to EN 10204-3.1

RK-Ecoball - the low-price solution for simple applications

This stainless steel series RK-Ecoball is designed for simple applications. To optimise the pricing of these products we didn't design the top flanges acc. to DIN EN ISO 5211. If you need a high quality ball valve with actuator we offer your choice for the RK-Proball series. Without any non ferrous metals RK-Ecoball is having a wide range of simple standard applications.

Advantages of series "RK-Ecoball":

• cost-effectiveness
• corrosion resistant
• inspection certificate acc. to EN 10204-3.1

Accessories:

• stem extension

Certificates and Approvals:

• inspection certificate acc. to EN 10204-3.1

RK-Chemoball - for applications in industry. Uncompromising good.

This ball valve is specially designed for applications in chemical industry, raffinery, gas depots. The various design - cast steel and stainless steel - make him suitable for every application.

Advantages of series  "RK-Chemoball":

• flow direction as required
• full bore, machined
• "blow out" proof operating stem
• special operating stem guide
• top flange DIN EN ISO 5211
• antistatic design
• completely enclosed body seal

Accessories:

• locking device for handle
• stem extension
• stem extension with safety stuffing box
• heating jacket

Special designs:

• special materials like 1.4539 und 1.4301
• metal seated up to +400°C
• PEEK tighten
• other pressure classes on request
• other ANSI design on request

Certificates and Approvals:

• inspection certificate acc. to EN 10204-3.1
• type tested by TÜV
• design acc. to DIN EN 19
• certified acc. to German clean air act VDI 2440

Chemoball-CI - highest quality for chemical industry

Ball valves Chemoball-CI, the technical advancement for the RK-Chemoball series, offers highest technology and newest materials.

Advantages of series "Chemoball-CI":

• certified acc. to German clean air act VDI 2440
• approvals acc. to virtually regulations
• wide field of applications
• temperature range from -60°C up to +300°C
• low torques for economical automatisation
• wide range of KLINGER sealing materials
• clearance volume minimized
• top flange DIN EN ISO 5211

Accessories:

• locking device for hand lever
• stem extension
• stem extension with safety stuffing box
• heating jacket

Certificates and Approvals:

• CE-identification for applications in fluid group 1
• classification acc. to SIL 3 (Safety Integrity Level)
• calculation shell design strength acc. to EN 12516 and optimisation acc. to "finite elemente methods"
• stuffing box acc. to German clean air act VDI 2440, -10°C up to +220°C, 60.000 cycles
• type tested by TÜV Rheinland e.V.
• type test for tanks for conveyance of dangerous goods
• BAM-tested by "Bundesanstalt für Materialforschung und -prüfung"
• Fire-Safe acc. to API 607 and EN ISO 10497
• certification for low temperature applications by TÜV Rheinland e.V.
• certification of test material

KLINGER KVn - Piston valves for a large field of applications

The unic principle of the KLINGER piston valve is unbeatable at steam and condensate applications as well as for many other uses. Several certifications as TA-Luft (Clean air act), Fire-Safe, certs for tank wagon as well as for food applications, to name only a few of the application fields, show the wide range of performance features.

Advantanges of  "Piston valves KVn":

• reliably tight - across the bore and to the atmoshere
• larger sealing surface compared to other valve types
• sensitive to sedimentations and vibrations
• self cleaning due to construction design
• no erosion on the sealing surface
• high durability (operating cycles)
• unbeatable in a comparison of profitability (low life cycle costs)
• maintenance-free
• valve remains in line if valve rings have to be replaced
• environmentally safe and energy efficient: emission tested acc. to TA-Luft VDI 2440 and EN 15848

Accessories:

• actuators (electro mechanical, pneumatic)

Special designs:

• regulating piston valve DN 15 - DN 50 with regulation piston
• regulating piston valve DN 65 - DN 200 with regulation lantern bush
• piston valve for tank vehicles

Certificates and Approvals:

• Fire-Safe aa. to API 6F
• type approval acc. to VdTÜV 1065
• type approval for tankers
• release for oxygen service
• successfully emission tested acc. to the requirements of TA-LUFT, EN 15848 and VDI 2440

RK-Needle valves - your miniplant valve for generally applications

With conventional stuffing box or bellow sealed and safety stuffing box a good solution with clamping ring connection for your miniplant or measurement application.

Advantages of  "RK-Needle valves":

• compact design
• compatible with tre current clamping ring connection manufactures
• one-oiece solid body
• TA-Luft-design with bellow and safety stuffing box

Accessories:

• stem extension

Special designs:

• special materials like Titan, Hastelloy etc.
• soft seated or metal seated
• stuffing box made of Graphite or PTFE
• with female threaded ends
• with male threaded ends
• male/female variation
• light series acc. to DIN 3861
• NPT-thread

KLINGER Ballostar KHE - fit to face any application!

The product line KHE completes the range of KLINGER Ballostar split body ball valves for the sizes DN 15 up to DN 200. To ensure it can cope with different needs and is fit to face any application, the KLINGER Ballostar KHE ball valve satisfies with a modular system of stuffing boxes and sealing elements.

Advantages of series "KLINGER Ballostar KHE":

• reliably tight inline and to the atmosphere
• preloaded, elastic sealing system
• spring-loaded labyrinth stuffing box
• modular system components
• maintenance-free
• best suited for automation
• top flange DIN EN ISO 5211
• Fire-Safe in standard version (from DN 15 up to DN 100)
• self pressure relief of the clearance volume

Accessories:

• actuators (directly or via mounting kit)
• regulating disc
• operating stem extension (also with protection pipe)

Special designs:

• metal seats for abrasive media

Certificates and Approvals:

• Fire-Safe acc. to EN ISO 10497
• emission testing acc. to VDI 2440
• valves for gas distribution systems acc. to EN 13774
• valves for natural gas transport in pipelines acc. to EN 14141
• valve (soft seated) with class A leak tightness acc. to EN 12266
• approved for oxygen application (resistance to internal burnout was tested by BAM)

KLINGER Ballostar KHI - the ball valve for rough use

For use everywhere reliable functioning is required, where large nominal diameters are used and where minimum pressure loss is essential. KLINGER Ballostar KHI is recommended for petrochemistry, the pulp industry, chemical industry and general plant construction. This is a ball valve with a doubly independent sealing system. By the way: This valve is also acknowleged by the TÜV (German Technical Inspection Association) as a double shut-off device!

Advantages of series  "KLINGER Ballostar KHI":

• reliable seat and stem leak-tightness
• application as double acting shut-off device with pressure relief
• draining of cavity and tightness testing of seats by drain- und test cock
• best suitable for automation
• bi-directional in line tightness
• long service life
• maintenance-free
• compact and robust body design
• insensitive to pipeline forces
• resistant against fluid contamination
• valve installation in any position
• slightest pressure losses

Accessories:

• regulating disc
• drain-, air relief and flushing connections

Special designs:

• KHSVWI/KHWI version for high operating temperatures (steam service)
• special design for slurry transport
• metal seats for abrasive media
• Bypass-design
• special-coated ball (chem. nickel, tungsten carbide)

Certificates and Approvals:

• Fire-Safe acc. to API 607, 4th Edition
• confirmation of sealing chamber and double blocking (TRD 601)
• type approval acc. to EN 161 (automatic shutt-off valves for gas burners and gas appliances)
• gas approval (ÖVGW)
• type approval acc. to EN 488
• emission-tested acc. to VDI 2440

KLINGER Ballostar KHA - safety from modular design!

The KLINGER Ballostar KHA is a top-class three-way ball valve from KLINGER. The ideal valves for automation.

Advantages of series "KLINGER Ballostar KHA":

• reliably tight inline and to the atmosphere
• preloaded, elastic sealing system
• bi-directional, automatic sealing chamber
• modular system components
• wide field of applications
• antistatic design
• maintenance-free
• best suited for automation
• top flange DIN EN ISO 5211

Accessories:

• actuators (directly or via mounting kit)
• stem extension
• regulating disc
• heating jacket

Special designs:

• metal seat ball valve
• shut-off valve for tank vehicles
• cryogenic ball valve
• valve for gas and vacuum service

Certificates and Approvals:

• Fire-Safe acc. to API 607, 4th Edition
• type tested acc. to VdTÜV 1065
• valve successfully tested acc. to TA-Luft requirements
• emission-tested acc. to VDI 2440
• type approved acc. to EN 161: automatic shut-off valves for gas burners and gas appliances
• type approved acc. to EN 264: safety shut-off devices for combustion plants using liquid fuels
• approved for use with oxygen
• valve for gas distribution (ÖVGW)
• type approved for application on tank vehicles

AB-cocks - shut-off valves for special instrumentation applications

Advantages of  "AB-cocks":

• 90° operation permits immediate opening/closing
• large sealing surface guarantees leak-tight seal across the bore and to the atmosphere - hence no false instrument readings
• suitable for throttling purposes and therefore in blow-down lines
• simple design (only one moving part) ensures uninterrupted operation
• the packing sleeve, the only part subject to wear, can be replaced within minutes with cock remaining in line
• cocks can be retightened
• equipped with plug made of stainless steel
• no seizure caused by corrosion
• wide field of application
• special designs for pressure gauges, indicators and liquid level gauges

Certificates and Approvals:

• emission testing acc. to VDI 2440

INTEC K2..0 - the high end ball valves for the chemical industry.
One concept for all!

A high end ball valve which realize all newest technical requirements:

• maintenance free
• reinforced stem design for more safety in automation
• clearance volume minimized
• dynamic primary sealing by floating ring princible
• optimized conception between preliminary tension and elastic force of the stuffing box without using of disc springs and elastomers
• system design in a graphite/KF cone ring system
• stuffing box system absolutely ageing resistant
• Fire-Safe-/Clean air act design all in one - the best standard
• FDA conformity for pharmaceutical application
• system construction unit of all components for reduction of storage costs

Advantages "seat ring system soft seated":

• three side chambering of the seat ring
• using of nitrogenium sintered high quality KFGN
• reduction of abrasion, microdiffusion and operating torque
• with KFCM-sealing material applicable up to +300°C
• best experiences in the chemical industry are made

Accessories:

• heating jacket
• hand lever extension
• hand lever with bayonet locking
• stem extension
• block unit - padlock unit
• grid unit
• spring close unit - automatical return handle ("dead man handle")
• gear (hand operated)

Special designs:

• special designs like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440,
  -40°C up to +220°C, 100.000 cycles
• Fire-Safe acc. to BS 6755, EN ISO 10497, API 607
• type tested by VdTÜV 1065, VbF, Gas-HI-VO, WHG
• classification acc. to SIL 3 (Safety Integrity Level)

BASF-specification
H672 / H673 / H622 / H623
2-piece split body, floating ball, soft seated

A high end ball valve which realize all newest technical requirements:

• maintenance free
• reinforced stem design for more safety in automation
• clearance volume minimized
• dynamic primary sealing by floating ring princible
• optimized conception between preliminary tension and elastic force of the stuffing box without using of disc springs and elastomers
• system design in a graphite/KF cone ring system
• stuffing box system absolutely ageing resistant
• Fire-Safe-/Clean air act design all in one - the best standard
• FDA conformity for pharmaceutical application
• system construction unit of all components for reduction of storage costs

Advantages "seat ring system soft seated":

• three side chambering of the seat ring
• using of nitrogenium sintered high quality KFGN
• reduction of abrasion, microdiffusion and operating torque
• with KFCM-sealing material applicable up to +300°C
• best experiences in the chemical industry are made

Accessories:

• heating jacket
• hand lever extension
• hand lever with bayonet locking
• stem extension
• block unit - padlock unit
• grid unit
• spring close unit - automatical return handle ("dead man handle")
• gear (hand operated)

Special designs:

• special designs like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440,
  -40°C up to +220°C, 100.000 cycles
• Fire-Safe acc. to BS 6755, EN ISO 10497, API 607
• type tested by VdTÜV 1065, VbF, Gas-HI-VO, WHG
• classification acc. to SIL 3 (Safety Integrity Level)

BASF-specification
H656/ H657 / H608 / H609
2-piece split body, floating ball, soft seated, single spring loaded seat ring

A high end ball valve which realize all newest technical requirements:

• maintenance free
• reinforced stem design for more safety in automation
• clearance volume minimized
• dynamic primary sealing by floating ring princible
• optimized conception between preliminary tension and elastic force of the stuffing box without using of disc springs and elastomers
• system design in a graphite/KF cone ring system
• stuffing box system absolutely ageing resistant
• Fire-Safe-/Clean air act design all in one - the best standard
• FDA conformity for pharmaceutical application
• system construction unit of all components for reduction of storage costs

Advantages "seat ring system soft seated":

• three side chambering of the seat ring
• using of nitrogenium sintered high quality KFGN
• reduction of abrasion, microdiffusion and operating torque
• with KFCM-sealing material applicable up to +300°C
• best experiences in the chemical industry are made

Accessories:

• heating jacket
• hand lever extension
• hand lever with bayonet locking
• stem extension
• block unit - padlock unit
• grid unit
• spring close unit - automatical return handle ("dead man handle")
• gear (hand operated)

Special designs:

• special designs like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440,
  -40°C up to +220°C, 100.000 cycles
• Fire-Safe acc. to BS 6755, EN ISO 10497, API 607
• type tested by VdTÜV 1065, VbF, Gas-HI-VO, WHG
• classification acc. to SIL 3 (Safety Integrity Level)

BASF-specification
H670 / H630
2-piece split body, trunnion mounted ball, soft seated, both sides loaded seat ring

A high end ball valve which realize all newest technical requirements:

• maintenance free
• reinforced stem design for more safety in automation
• clearance volume minimized
• dynamic primary sealing by floating ring princible
• optimized conception between preliminary tension and elastic force of the stuffing box without using of disc springs and elastomers
• system design in a graphite/KF cone ring system
• stuffing box system absolutely ageing resistant
• Fire-Safe-/Clean air act design all in one - the best standard
• FDA conformity for pharmaceutical application
• system construction unit of all components for reduction of storage costs

Advantages "seat ring system soft seated":

• three side chambering of the seat ring
• using of nitrogenium sintered high quality KFGN
• reduction of abrasion, microdiffusion and operating torque
• with KFCM-sealing material applicable up to +300°C
• best experiences in the chemical industry are made

Accessories:

• heating jacket
• hand lever extension
• hand lever with bayonet locking
• stem extension
• block unit - padlock unit
• grid unit
• spring close unit - automatical return handle ("dead man handle")
• gear (hand operated)

Special designs:

• special designs like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440,
  -40°C up to +220°C, 100.000 cycles
• Fire-Safe acc. to BS 6755, EN ISO 10497, API 607
• type tested by VdTÜV 1065, VbF, Gas-HI-VO, WHG
• classification acc. to SIL 3 (Safety Integrity Level)

2-piece split body, floating ball, metal seated, single spring loaded seat ring

A high end ball valve which realize all newest technical requirements:

• maintenance free
• reinforced stem design for more safety in automation
• clearance volume minimized
• dynamic primary sealing by floating ring princible
• optimized conception between preliminary tension and elastic force of the stuffing box without using of disc springs and elastomers
• system design in a graphite/KF cone ring system
• stuffing box system absolutely ageing resistant
• Fire-Safe-/Clean air act design all in one - the best standard
• FDA conformity for pharmaceutical application
• system construction unit of all components for reduction of storage costs

Advantages "seat ring system metal seated":

• seat ring and ball hart metal coated by flame-spray technology
• sleeken seat and ball polished
• high precision beared ball
• spring loaded, spiral springs chambered
• no use of disc springs to forcing the seat ring
• no dangerous because of crevice corrosion
• also metal to metal gas tight

Accessories:

• heating jacket
• hand lever extension
• hand lever with bayonet locking
• stem extension
• block unit - padlock unit
• grid unit
• spring close unit - automatical return handle ("dead man handle")
• gear (hand operated)

Special designs:

• special designs like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440,
  -40°C up to +220°C, 100.000 cycles
• Fire-Safe acc. to BS 6755, EN ISO 10497, API 607
• type tested by VdTÜV 1065, VbF, Gas-HI-VO, WHG
• classification acc. to SIL 3 (Safety Integrity Level)

2-piece split body, trunnion mounted ball, metal seated, both sides spring loaded seat ring

A high end ball valve which realize all newest technical requirements:

• maintenance free
• reinforced stem design for more safety in automation
• clearance volume minimized
• dynamic primary sealing by floating ring princible
• optimized conception between preliminary tension and elastic force of the stuffing box without using of disc springs and elastomers
• system design in a graphite/KF cone ring system
• stuffing box system absolutely ageing resistant
• Fire-Safe-/Clean air act design all in one - the best standard
• FDA conformity for pharmaceutical application
• system construction unit of all components for reduction of storage costs

Advantages "seat ring system metal seated":

• seat ring and ball hart metal coated by flame-spray technology
• sleeken seat and ball polished
• high precision beared ball
• spring loaded, spiral springs chambered
• no use of disc springs to forcing the seat ring
• no dangerous because of crevice corrosion
• also metal to metal gas tight

Accessories:

• heating jacket
• hand lever extension
• hand lever with bayonet locking
• stem extension
• block unit - padlock unit
• grid unit
• spring close unit - automatical return handle ("dead man handle")
• gear (hand operated)

Special designs:

• special designs like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440,
  -40°C up to +220°C, 100.000 cycles
• Fire-Safe acc. to BS 6755, EN ISO 10497, API 607
• type tested by VdTÜV 1065, VbF, Gas-HI-VO, WHG
• classification acc. to SIL 3 (Safety Integrity Level)

BASF-specification
H401L
up to PN 63, 2-piece split body, floating ball, metal seated, single spring loaded seat ring

A high end ball valve which realize all newest technical requirements:

• maintenance free
• reinforced stem design for more safety in automation
• clearance volume minimized
• dynamic primary sealing by floating ring princible
• optimized conception between preliminary tension and elastic force of the stuffing box without using of disc springs and elastomers
• system design in a graphite/KF cone ring system
• stuffing box system absolutely ageing resistant
• Fire-Safe-/Clean air act design all in one - the best standard
• FDA conformity for pharmaceutical application
• system construction unit of all components for reduction of storage costs

Advantages "seat ring system metal seated":

• seat ring and ball hart metal coated by flame-spray technology
• sleeken seat and ball polished
• high precision beared ball
• spring loaded, spiral springs chambered
• no use of disc springs to forcing the seat ring
• no dangerous because of crevice corrosion
• also metal to metal gas tight

Accessories:

• heating jacket
• hand lever extension
• hand lever with bayonet locking
• stem extension
• block unit - padlock unit
• grid unit
• spring close unit - automatical return handle ("dead man handle")
• gear (hand operated)

Special designs:

• special designs like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440,
  -40°C up to +220°C, 100.000 cycles
• Fire-Safe acc. to BS 6755, EN ISO 10497, API 607
• type tested by VdTÜV 1065, VbF, Gas-HI-VO, WHG
• classification acc. to SIL 3 (Safety Integrity Level)

BASF-specification
H401L
up to PN 63, 2-piece split body, trunnion mounted ball, metal seated, both sides spring loaded seat ring

A high end ball valve which realize all newest technical requirements:

• maintenance free
• reinforced stem design for more safety in automation
• clearance volume minimized
• dynamic primary sealing by floating ring princible
• optimized conception between preliminary tension and elastic force of the stuffing box without using of disc springs and elastomers
• system design in a graphite/KF cone ring system
• stuffing box system absolutely ageing resistant
• Fire-Safe-/Clean air act design all in one - the best standard
• FDA conformity for pharmaceutical application
• system construction unit of all components for reduction of storage costs

Advantages "seat ring system metal seated":

• seat ring and ball hart metal coated by flame-spray technology
• sleeken seat and ball polished
• high precision beared ball
• spring loaded, spiral springs chambered
• no use of disc springs to forcing the seat ring
• no dangerous because of crevice corrosion
• also metal to metal gas tight

Accessories:

• heating jacket
• hand lever extension
• hand lever with bayonet locking
• stem extension
• block unit - padlock unit
• grid unit
• spring close unit - automatical return handle ("dead man handle")
• gear (hand operated)

Special designs:

• special designs like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440,
  -40°C up to +220°C, 100.000 cycles
• Fire-Safe acc. to BS 6755, EN ISO 10497, API 607
• type tested by VdTÜV 1065, VbF, Gas-HI-VO, WHG
• classification acc. to SIL 3 (Safety Integrity Level)

3-piece split body, trunnion mounted ball, metal seated, both sides spring loaded seat ring

High precision bearings and both sides spring loaded seat ring elements are responsible for a safety handling in all applications of the high pressure ranges.

Advantages of "INTEC 117G":

• certified acc. to German clean air act VDI 2440
• equipped with all advantages of the series INTEC K200
• two-piece split body or three-piece split body
• extreme long-life acc. high precision bearing of the stem
• optimized arrangement of the bearing forces
• soft seated or metal seated
• leackage rate A

Accessories:

• heating jacket
• hand lever extension
• stem extension
• block unit - padlock unit
• grid unit
• hand lever with bayonet locking
• gear (hand operated)

Special designs:

• special materials like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Approvals:

• certified acc. to German clean air act VDI 2440, -10°C up to +220°C, 100.000 cycles

BASF-specification
H658 / H638
Wafer type ball valve, floating ball, soft seated

Equipped with all advantages of the INTEC K200 as well as face to face dimensions acc. to EN 558, GR. 107, this wafer type ball valve is the favorite for special materials in all chemical plants.

Advantages of series "INTEC 112-K"

• certified acc. to German clean air act VDI 2440
• equipped with all advantages of the series INTEC K200
• face to face dimensions acc. to EN 558, GR. 107
• in many special materials available
• top flange DIN EN ISO 5211

Accessories:

• heating jacket
• hand lever extension
• stem extension
• block unit - padlock unit
• grit unit
• hand lever with bayonet locking
• spring close unit - automatical return handle ("dead man handle")
• gear (hand operated)

Special designs:

• special materials like Titan, Hastelloy, 1.4539, 1.4462, Zirkonium etc.

Certificates and Appovals:

• certified acc. to German clean air act VDI 2440
• Fire-Safe acc. to BS 6755 and EN ISO 10497

BASF-specification
H668
Economic wafer type ball valve, floating ball, soft seated

Maintenance-free and adjustable, with face to face dimensions acc. to EN 558, GR. 107, this economic wafer type ball valve is the synonym for economy in energy and standard applications.

Advantages of "INTEC 112-K-E"

• face to face dimensions acc. to EN 558, GR. 107
• standardization face to face quarantee the interchangeability
• maintenance-free
• top flange DIN EN ISO 5211

Accessories:

• hand lever extension
• block unit - padlock unit
• grit unit
• hand lever with bayonet locking
• spring close unit - automatical return handle ("dead man handle")
• gear (hand operated)

Certificates and Approvals:

• inspection certificate acc. to EN 10204-3.1